RV Molding Trims are a small upgrade that can make a big difference to your camper’s longevity, appearance, and water resistance. You get protection for exposed screws and seams, a neater exterior, and an easy DIY job that can keep costly leaks and rust at bay.

Top Picks

How We Picked These RV Molding Trims

You want trims that protect screws, seal channels, and last through sun and road wear. We evaluated material (vinyl, rubber, TPE), UV resistance, roll length options so you don’t run short, fit type (vehicle specific vs universal), ease of installation, user reviews, value per foot, and whether the product includes helpful extras like end caps or screws. We favored products with consistently high customer ratings and clear specs that make it easy for you to measure, match, and install.

1″ RV Trim Molding Insert (100 ft)

If you want a quick, practical way to freshen up your rig, this 1″ RV Trim Molding Insert from Reggory is one of those simple upgrades that actually makes a difference. You get 100 ft of heavy‑duty vinyl that’s UV resistant, flexible enough to follow curves, and built to cover exposed screws and help keep water out. For everyday use it tidies up worn or cracked trim, and for road trips or shows it keeps your exterior looking neat without a full refinish.

Installation is straightforward: unscrew the old track, cut the new insert to length, and reinstall—just remember you might need a few replacement clips in spots. I’d recommend it if you want an affordable, durable way to protect and improve the look of your RV Molding Trims.

What People Say

Buyers note it’s durable, looks good once installed, and is relatively easy to fit—just plan for a few extra clips around tricky screw locations.

Long-Term Cost Benefits

By protecting screws and seams from weather, this trim helps avoid leaks and the bigger repair bills that follow. The 100 ft roll means fewer trips to buy replacements, and UV resistance lowers the chance you’ll need to swap it out due to sun damage.

Return on Investment

For about $17.78 you get enough material to re-trim large sections of your RV, which is far cheaper than professional bodywork or repeated small repairs—so you’ll likely recoup the cost after just one avoided repair.

Situational Benefits

Environmental Benefits

Ease of Use

Versatility

Works on a variety of exterior surfaces—window surrounds, side body, bumpers and gutters—so you can use the same RV Molding Trims material for multiple minor repairs or aesthetic updates.

Durability

Made from premium heavy‑duty vinyl with UV protection, it holds up well against sun exposure and road vibration. Reviews repeatedly call it durable and flexible without being flimsy.

Problem Solving Ability

Solves common issues like exposed screws, cracked or missing trim, and minor leaks by providing a continuous protective cover that restores the seal and appearance.

Key Benefits

• Covers exposed screws to reduce water intrusion
• UV-resistant vinyl resists fading
• 100 ft length covers most replacement needs
• Flexible but sturdy—conforms to curves without tearing
• Affordable way to refresh exterior appearance

Current Price: $17.78

Rating: 4.8 (total: 146+)

🛒See Offer

1″ RV Vinyl Trim Molding Insert (120 Ft)

If you want a no-fuss way to tidy up and protect your rig, this 1″ vinyl insert gives you plenty of coverage—120 ft of flexible, black trim that snaps into existing channels to hide screws and help keep water out. You can use it for everyday fixes when trim is cracked or missing, or for road trips and show prep when you want the exterior to look neat.

Installation is straightforward: cut to length, press into the track and refasten the screws. It’s a practical, affordable way to refresh RV Molding Trims without a full body job, and it holds up well to sun and vibration so you won’t be re-doing it every season.

What People Say

Buyers say it fits well, installs without much fuss, and feels thicker and more durable than cheaper alternatives.

Long-Term Cost Benefits

By sealing screw heads and worn trim you prevent leaks and the bigger repairs that follow. The 120 ft roll and $0.14 per foot unit cost mean fewer trips to replace short pieces, so you spend less over time.

Return on Investment

At $16.99 for 120 ft, this is a low-cost fix that can prevent a single water-related repair or reseal job, so you’ll likely recoup the expense after avoiding one moderate repair.

Situational Benefits

Environmental Benefits

Ease of Use

Versatility

Works across gutters, side trim and around windows on RVs, campers and trailers, so the same RV Molding Trims can handle several small repairs or aesthetic updates.

Durability

Made from flexible vinyl that resists UV and road vibration; reviewers note it feels thicker and holds up better than cheaper strips.

Problem Solving Ability

Fixes common issues like exposed screws, cracked trim and minor leaking by providing a continuous protective cover that restores the seal and look.

Key Benefits

• Covers exposed screws to reduce water intrusion
• 120 ft length covers large sections without multiple purchases
• Flexible vinyl follows curves but stays sturdy
• Black finish restores a clean, continuous look
• Simple install saves time compared with full repairs

Current Price: $16.99

Rating: 4.8 (total: 45+)

🛒See Offer

1″ Black Vinyl Trim Molding Screw Cover (100 Ft)

If you want a simple way to tidy up your RV Molding Trims and stop water sneaking in, this 1″ black vinyl strip is one of the easiest fixes you’ll find. You cut it to length, press it into the existing channel and refasten the screws — no specialist tools or bodywork. Use it for everyday maintenance when a strip cracks, before a long trip to avoid leaks, or when you want the exterior to look pulled together for a sale or show. It’s flexible enough to follow curves, thick enough to feel sturdy, and made to stand up to sun and road vibration, so you won’t be redoing it after one season.

If you like hands-on fixes, this is a practical, budget-friendly way to refresh your trim.

What People Say

People note it fits well in existing channels, installs without much fuss, and can stop leaking trim when the old strip has failed.

Long-Term Cost Benefits

By protecting screw heads and resealing worn trim you avoid moisture damage that leads to costly repairs. At $25.99 for 100 ft, one roll replaces multiple shorter pieces and reduces repeat purchases.

Return on Investment

At $25.99, this is a low-cost preventative step — replacing a single leaking section now can prevent a larger reseal or panel repair later, making the investment pay off quickly.

Situational Benefits

Environmental Benefits

Ease of Use

Versatility

Works across side moldings, around windows and trim channels on RVs, campers and trailers, so the same roll can handle multiple repair spots.

Durability

Made from thick, UV-resistant vinyl designed to stand up to sun exposure and road vibration; purchasers report it feels sturdier than cheaper options.

Problem Solving Ability

Stops common issues like exposed screws, cracked trim and minor leaks by providing a continuous protective cover that restores the seal and appearance.

Key Benefits

• Covers exposed screws to reduce water intrusion
• 100 ft length covers large sections in one roll
• Flexible vinyl conforms to curves without cracking
• Black finish restores a clean, continuous look
• Straightforward install — cut, press in, refasten screws

Current Price: $25.99

Rating: 4.8 (total: 761+)

🛒See Offer

RV Designer Heavy Duty 1″ Vinyl Trim (100 Ft)

If you want an easy way to tidy up your RV Molding Trims and lock out leaks, this heavy-duty 1″ vinyl insert is a solid choice. You cut it to length, warm it briefly in the sun if it’s stiff, then press it into the existing channel — no special tools. Use it for routine fixes when a strip cracks, before a long haul to avoid surprises on the road, or when you want the exterior to look sharp for a sale or campsite. It’s flexible enough to follow gentle curves, thick enough to feel durable, and made to stand up to sun and vibration, so you’re not redoing the job after one season.

If you like practical, hands-on repairs that actually last, this one earns its spot in your toolbox.

What People Say

Owners praise its durability and how quickly it installs once you warm it up a bit; many recommend the Heavy Duty 100 ft variant over the thinner standard option.

Long-Term Cost Benefits

By sealing screw heads and replacing brittle trim you limit water intrusion that leads to rot, panel repairs, or reseals. At about $31.20 for a 100 ft roll, one purchase covers large sections and reduces repeated small replacements.

Return on Investment

For roughly $31.20 you get a preventative fix that can avoid much pricier body or interior repairs down the road — a quick, low-cost way to protect your RV’s exterior.

Situational Benefits

Environmental Benefits

Ease of Use

Versatility

Good for roof edges, corner molding, screw cover trim and other exterior trim channels on travel trailers, campers and cargo trailers — one roll handles multiple fixes.

Durability

Heavy-duty vinyl feels rubbery rather than brittle, resists UV and road vibration, and many users report confidence it will outlast standard plastic alternatives.

Problem Solving Ability

Stops common issues like cracked trim, exposed screws and minor leaks by restoring a continuous protective cover that’s easy to install and holds up in different climates.

Key Benefits

• Covers exposed screws and restores a continuous seal
• 100 ft roll handles long runs so you don’t splice frequently
• Heavy-duty vinyl stays flexible while resisting cracking
• Weather-resistant finish holds up to sun and road vibration
• Simple DIY install — cut, warm if needed, press into the track

Current Price: $31.20

Rating: 4.7 (total: 4,216+)

🛒See Offer

TeegRoow 1″ RV Trim Molding Insert (50 ft)

If you want an easy, budget-friendly way to tidy up your RV Molding Trims and keep water out, this 1″ x 50 ft vinyl insert is worth a look. You cut it to length, warm a short section in the sun if it’s stiff, then press it into the existing channel — no glue or fancy tools.

It’s flexible enough to follow gentle curves, thick enough to feel substantial, and made to resist UV fading so you’re not replacing it every season. Use it for quick roadside fixes, a pre-trip check to avoid leaks, or when you want the exterior to look cleaner before a sale. For straightforward repairs that actually hold up, this one’s a practical choice.

What People Say

Buyers note the trim matches original color well, installs quickly, and creates a tight seal — many replaced factory trim that had come loose or cracked.

Long-Term Cost Benefits

At about $12.58 for a 50 ft roll, a single replacement seals exposed screws and prevents water intrusion that leads to costly panel or interior repairs; you’ll likely avoid repeated small fixes by choosing a heavier vinyl insert.

Return on Investment

For $12.58 you get a preventative fix that can stop leaks and slow deterioration of exterior panels — a small outlay compared with blade-out repairs, resealing jobs, or replacing water-damaged components.

Situational Benefits

Environmental Benefits

Ease of Use

Versatility

Good for roof edges, corner molding, screw cover trim and rain gutter applications on RVs, campers and travel trailers — one roll covers multiple repair spots.

Durability

Heavy-duty rubber/vinyl construction with UV-resistant coating resists cracking and fading better than thinner plastic trims.

Problem Solving Ability

Restores a continuous protective cover to stop common issues like exposed screws, loose trim and minor leaks — easy to fit into existing channels to solve cosmetic and sealing problems.

Key Benefits

• Covers exposed screws and restores a continuous seal
• 1″ width and 50 ft roll handles medium runs without frequent splices
• Heavy-duty vinyl with UV-resistant coating to resist cracking and fading
• Flexible for gentle curves and corner applications
• Simple DIY install — cut to length and press into the existing track

Current Price: $12.58

Rating: 4.7 (total: 100+)

🛒See Offer

1\” x 100FT RV Trim Molding Insert (Black)

If you want a simple, durable way to tidy up your RV Molding Trims and keep water out, this 1″ x 100 ft TPE insert is a smart pick. You cut it to length, warm a short section in the sun if it’s stiff, then press it into the existing channel — no glue or special tools.

It’s softer and more flexible than vinyl, resists heat and cracking, and covers exposed screws and corners so you won’t be chasing leaks. Use it for everyday touch-ups, a pre-trip check before a long haul, or when you want the exterior looking sharp for a campsite or sale.

If you prefer a low-effort fix that actually lasts, this one fits the bill.

What People Say

You’ll find owners saying it installs easily, holds up on long trips, and usually outlasts the thin vinyl strips the manufacturer used.

Long-Term Cost Benefits

At $15.77 for 100 ft (about $0.16 / ft), you get an economical way to prevent water damage and rust that can lead to expensive panel or interior repairs over time.

Return on Investment

Spending $15.77 to seal exposed screws and protect seams is a small upfront cost compared with repairing water-damaged trim, insulation or interior panels; the durability means fewer repeat fixes.

Situational Benefits

Environmental Benefits

Ease of Use

Versatility

Works for roof edges, screw covers, corners, channels and many exterior seams on RVs, campers, travel trailers and even boats — one roll covers multiple spots.

Durability

Made from heavy-duty TPE that resists heat, cracking and discoloration better than thinner vinyl, so it stands up on long trips and in sun-exposed areas.

Problem Solving Ability

Restores a continuous protective cover to stop common issues like exposed screws, loose trim and minor leaks — fits existing tracks to solve both cosmetic and sealing problems.

Key Benefits

• Covers exposed screws and restores a continuous protective line
• 100 ft roll reduces the need for multiple splices on medium-to-large coaches
• TPE construction is softer and more flexible than vinyl, resisting cracks and warping
• Weatherproof design helps prevent rust and water intrusion
• No adhesives required — fits into existing channels for fast DIY installs

Current Price: $15.77

Rating: 4.7 (total: 75+)

🛒See Offer

RecPro 1″ x 100ft RV Vinyl Trim Insert (Black)

If you want a straightforward way to refresh your RV Molding Trims and keep moisture out, this 1″ RecPro vinyl insert is a handy option. You cut it to length, then press or pinch it into the existing channel — some people find sliding it in works for short runs, but pinching and seating works best for longer sections. It hides exposed screws, resists sun fade thanks to UV protection, and comes in a 100 ft roll so you can handle a full coach without awkward splices. Use it for routine touch-ups, before a big trip, or when you want the exterior to look tidy for the campsite or sale.

If you prefer a low-fuss DIY fix that looks factory-matched, this one is worth considering.

What People Say

You’ll see owners say it fits like a factory strip, hides screws, and is easy to install if you use the pinch-and-seat method and pre-check caulking.

Long-Term Cost Benefits

At $24.95 for a 100 ft roll (about $0.25 per foot), you get a cost-effective way to prevent water intrusion and the subsequent repairs to panels or interior materials that can be far more expensive.

Return on Investment

Spending $24.95 to reseal trim and cover fasteners is a small upfront cost compared with repairing water-damaged trim, cabinetry or insulation; one roll covers most coaches, reducing repeat purchases.

Situational Benefits

Environmental Benefits

Ease of Use

Versatility

Good for roof edges, screw covers, trim channels, and many exterior seams on RVs, travel trailers and campers — one roll covers multiple repair spots.

Durability

Durable vinyl with UV protection resists sun fade and holds up well on long trips, though some users note slight shrinkage over time in certain sections.

Problem Solving Ability

Restores a continuous protective cover to prevent common issues like exposed screws, loose trim and minor leaks; fits existing tracks so you can fix both cosmetic and sealing problems without major work.

Key Benefits

• Covers exposed screws and restores a continuous protective line
• 100 ft roll reduces the need for multiple splices on medium-to-large coaches
• UV-protected vinyl helps prevent sun fade and discoloration
• Standard replacement for most RV channels for quick DIY fixes
• Flexible enough to work around corners and rises with basic trimming

Current Price: $24.95

Rating: 4.7 (total: 1,581+)

🛒See Offer

CVILL 1\” Black Vinyl Trim Insert (50 ft)

If you want a simple way to freshen up RV Molding Trims and stop leaks, this 1″ black vinyl insert is a low-fuss option. You cut it to length, then pinch or flex it into the existing channel — short runs sometimes slide in, but most folks find pinching and seating more reliable for longer stretches.

It hides exposed screw heads, resists sun fade thanks to UV-resistant vinyl, and comes in multiple lengths so you can pick the roll size that matches your job. Use it for quick repairs after a windy weekend, as part of your pre-trip checklist, or when you want the exterior to look tidy for resale.

If you prefer a practical DIY fix that looks neat and keeps moisture out, this one performs exactly as you’d expect.

What People Say

You’ll see owners say it fits like the original, stops leaks when seated correctly, and is easy to trim and install with a pinch-and-seat approach.

Long-Term Cost Benefits

At $18.99 for a 50 ft roll (about $0.38 per foot), this insert is an inexpensive way to avoid water intrusion and the costly repair of panels, insulation, or interior damage.

Return on Investment

Spending $18.99 to reseal trim and cover fasteners is a modest upfront cost compared with repairing water-damaged siding or interior components; one 50 ft roll covers common repair spots on many trailers.

Situational Benefits

Environmental Benefits

Ease of Use

Versatility

Works on RVs, campers, trailers and boats for screw coverage, trim replacement, and small seam repairs; different roll lengths make it useful for spot fixes or larger projects.

Durability

Thick vinyl with UV resistance stands up well to sun and road travel; some owners advise checking edges and re-sealing fasteners to prevent wind lift over time.

Problem Solving Ability

Restores a continuous protective cover to hide screw heads, stop minor leaks, and replace cracked trim without major bodywork—useful for quick DIY fixes that prevent bigger problems.

Key Benefits

• Covers exposed screws and restores a continuous protective line
• Thick, UV-resistant vinyl helps prevent sun fade and brittleness
• Available in multiple roll lengths so you can choose the right amount
• Universal 1″ width fits most RV channels for quick DIY swaps
• Simple install — unscrew, remove old strip, insert new, re-screw

Current Price: $18.99

Rating: 4.8 (total: 761+)

🛒See Offer

ADKUN 1″ White Vinyl Trim Insert (25 ft)

If you want a neat, low-fuss way to refresh RV Molding Trims, this 1″ white vinyl insert is a solid choice. You cut it to length, clean the channel, then flex or pinch it into place — it’s pliable enough for gentle curves and stiff enough to hide exposed screws.

It helps keep dust and rain out of fastener holes and keeps screw heads from rusting, so it’s handy for everyday upkeep, pre-trip checks, or tidying the exterior before a sale. If you prefer a straightforward DIY fix that looks clean and lasts through sun and road wear, this one checks those boxes.

What People Say

You’ll find owners saying it fits like the original, installs without fuss if you clean the channel first, and flexes to follow curves on trailers and fifth-wheels.

Long-Term Cost Benefits

At $12.78 for a 25 ft roll (about $0.51 per foot), this insert is an inexpensive way to prevent water intrusion and avoid costly repairs to panels or interior components.

Return on Investment

Spending $12.78 to reseal trim and cover fasteners is a small upfront cost compared with fixing rot, rusted screws, or interior water damage; one roll covers common repair spots on many trailers.

Situational Benefits

Environmental Benefits

Ease of Use

Versatility

Works on RVs, campers, trailers and boats for screw coverage, trim replacement, and small seam repairs; multiple roll lengths suit spot fixes or larger projects.

Durability

Thick, automotive-grade vinyl with UV resistance stands up to sun and road travel; owners recommend checking edges and cleaning channels so the strip seats tightly and lasts.

Problem Solving Ability

Restores a continuous protective cover to hide screw heads, stop minor leaks, and replace cracked trim without major bodywork—useful for quick DIY fixes that prevent bigger problems.

Key Benefits

• Covers exposed screws and restores a continuous protective line
• Thick, UV-resistant vinyl helps resist sun fade and brittleness
• Available in multiple roll lengths so you can pick the right amount
• Universal 1″ width fits most RV channels for quick DIY swaps
• Simple install — unscrew old strip, insert new, re-screw

Current Price: $12.78

Rating: 4.6 (total: 341+)

🛒See Offer

ZRNIDIYR Heavy Duty Vinyl Insert Trim (7/8″ W, 100 ft)

If you want a no-fuss way to refresh your RV Molding Trims, this 7/8″ black vinyl insert is a practical pick. You get a full 100 ft roll so you can tackle several touch-ups in one go — cut it to length, warm it slightly if it’s curled, then seat it into the existing channel and re-screw.

It hides exposed screws, helps keep rain out of fastener holes, and resists UV so it won’t go brittle after a season on the road. Use it for routine upkeep, patching up damage after a windy night at the campground, or tidying the exterior before you sell or show the rig.

If you like a straightforward DIY fix that looks clean and holds up, this one is worth a look.

What People Say

Users say it fits like the original, installs easily once you warm or flex the roll, and feels thicker and more flexible than hard plastic alternatives — a tidy, long roll that covers lots of ground.

Long-Term Cost Benefits

At $32.99 for a 100 ft roll, you’re paying about $0.33 per foot to protect fasteners and seams. That small upfront cost can prevent rusted screws, water intrusion, and panel damage that lead to much higher repair bills.

Return on Investment

Spending $32.99 to reseal and cover trim is a low-cost preventive measure compared with replacing rotted trim panels or repairing interior water damage; one roll covers many common problem areas on trailers and fifth-wheels.

Situational Benefits

Environmental Benefits

Ease of Use

Versatility

Fits 7/8″ trim channels on RVs, travel trailers and campers; useful for covering screws, replacing brittle trim, and small seam repairs — the roll length suits both spot fixes and longer runs.

Durability

Thick vinyl with UV resistance stands up to sun exposure and road wear; customers note it’s more flexible and longer-lasting than hard plastic covers when installed correctly.

Problem Solving Ability

Restores a continuous cover over fasteners to stop minor leaks, hide rust-prone screw heads, and replace cracked trim without major bodywork — a quick DIY fix that prevents bigger issues.

Key Benefits

• Covers exposed screws and restores a continuous protective line
• Generous 100 ft roll — useful for multiple repairs or long runs
• Includes end caps and screws so you can finish small jobs immediately
• Weather-resistant, thick vinyl with UV resistance to reduce cracking
• Fits standard 7/8″ trim channels for quick DIY replacement without adhesive

Current Price: $32.99

Rating: 4.6 (total: 156+)

🛒See Offer

FAQ

How Do I Choose The Right RV Molding Trims For My RV?

You should start by measuring the channel width and the length you need, because many RVs use a 1″ standard but some require 7/8″ or other sizes; measure the track and bring a sample if possible. Consider material: vinyl is common and affordable, rubber or TPE often handle temperature swings better, and look for UV-resistant or heavy-duty options if you park in the sun.

Check fit type—vehicle specific fits reduce fiddling while universal fit options like CVILL and RV Designer give flexibility—and compare specs like thickness and flexibility. Price can guide value: for example, Reggory 1″ 100 ft rolls are about $17.78, Botyboty 120 ft runs about $16.99, and RV Designer 100 ft is around $31.20; buy a bit extra to account for waste and corners.

What Are The Best Installation Tips And Common Pitfalls To Avoid?

You’ll have an easier time if you warm the trim in the sun or inside so it’s more flexible and work on a warm day rather than forcing cold, stiff material; warm the trim for better handling. Insert the bottom rail first and work in short sections, use a plastic scraper or trim tool to tuck the top lip into the channel, and don’t forget to replace or reuse the clips—missing clips are a frequent reason trim won’t seat properly.

Watch screw holes and seams: clean out debris in the channel, recaulk fastener points as needed to stop leaks, and avoid pulling too hard where metal track screws are located so you don’t bend the rail.

How Long Will RV Molding Trims Last And How Do I Maintain Them?

Lifespan depends on material quality and sun exposure—good UV-resistant or heavy-duty vinyl/rubber trims often last several years longer than thin factory plastic; choose products labeled UV-resistant such as some Reggory and RecPro options. To maintain them, inspect annually for brittleness or gaps, clean the channel of dirt and tar, touch up caulk around screws to prevent leaks, and replace worn clips; if you notice shrinkage or cracking after heat cycles replace the affected run. Keeping spare length on hand and selecting heavier-duty inserts will reduce how often you need to redo sections.

Wrapping Up

Measure first, clean the channel, and pick the correct width. If you want the simplest combination of value, durability, and ease of installation, the Reggory 1″ 100 ft UV‑resistant roll is a great place to start. You’ll save yourself future sealing work by covering exposed screws, improve curb appeal, and often complete the job without a pro.

Remember to warm flexible trim on cold days, keep extra clips or end caps on hand, and test-fit a short section before committing to a full run. With the right RV Molding Trims, you protect your investment and make maintenance faster and less frequent.

Product	Image	Rating	Price	Material	Product Dimensions	Item Thickness	Best Sellers Rank
1″ RV Trim Molding Insert, 100ft UV Resistant RV Trim Molding Exterior		4.8/5 (146 reviews)	$17.78	Premium Heavy Duty Vinyl	1200″L x 1″W	1 Inches	#6,335 in Automotive (#1 in RV Molding Trims)
1″ RV Vinyl Trim Molding Insert, 120FT RV Weather Stripping		4.8/5 (45 reviews)	$16.99	Vinyl	1440″L x 1″W	0.05 Inches	#4,011 in Automotive (#1 in Automotive Side Moldings)
1″ Black Vinyl Trim Molding Screw Cover RV Boat Camper Travel Trailer (100 ft)		4.8/5 (761 reviews)	$25.99	Vinyl	1200″L x 1″W	0.45 Inches	#7,291 in Automotive (#2 in Automotive Side Moldings)
RV Designer 1 Inch Wide Vinyl Trim Insert		4.7/5 (4,216 reviews)	$31.20	Vinyl	12000″L x 1″W	1 Inches	#9,288 in Automotive (#3 in RV Molding Trims)
1” RV Trim Molding Insert, 50′ UV-Resistant RVs Weather Stripping Exterior		4.7/5 (100 reviews)	$12.58	Rubber, Vinyl	600″L x 1″W	0.1 Inches	#8,085 in Automotive (#2 in RV Molding Trims)
1″ RV Trim Molding Insert, 100 FT Heavy Duty RV TPE Trim Molding		4.7/5 (75 reviews)	$15.77	TPE	1″L x 1″W	1 Inches	#14,875 in Automotive (#7 in RV Molding Trims)
RecPro 1″ RV Vinyl Trim Insert | UV Protection | Roof Trim (100′, Black)		4.7/5 (1,581 reviews)	$24.95	Vinyl	12000″L x 1″W	1 Inches	#13,355 in Automotive (#24 in RV Furniture Parts & Hardware)
RV Vinyl Trim Molding Insert 1 inch White for RV Camper		4.6/5 (341 reviews)	$12.78	Vinyl	300″L x 1″W	1 Inches	#17,040 in Automotive (#29 in RV Furniture Parts & Hardware)
RV Heavy Duty Vinyl Insert Trim – 100FT Length, 7/8 Width		4.6/5 (156 reviews)	$32.99	Vinyl	1200″L x 0.88″W	0.45 Inches	#14,161 in Automotive (#6 in RV Molding Trims)

Related Articles 

• 10 Space-Saving RV Tables Perfect for Your Holiday Travels
• 10 RV Recliner Chairs That Will Make You Feel at Home on the Road
• How to Choose the Perfect RV Sofa for Your Next Adventure
• 10 Creative RV Lighting Ideas to Illuminate Your Travels
• How to Choose the Perfect RV Bed Pad for Your Next Adventure